where can i buy prednisone for dogs The main source of irrigation water on my home course is a pond on the fourth hole. The pump is housed in a corrugated-metal building concealed in some bushes near the pond’s far right-hand corner, about 180 yards from the main men’s tees—a location, that, coincidentally, is the universal crummy-tee-shot sweet spot for the average male golfer. (A pro at a golf development in Arizona once told me that you should never buy a house or building lot on the right-hand side of any golf hole 180 yards from the regular men’s tees, unless you wouldn’t mind building a dome over your swimming pool and glazing your windows with Lexan.) Sliced drives that don’t land in the pond often hit the roof of the pump house, making a distinctive clang that you can hear over much of the course.
By now, that sound is almost as much a part of our club’s culture as the window conveniently situated above the urinal in the men’s locker room. So here’s the problem: the pump house has been falling down for years—it’s currently being held up by the gray building jack you see in the center of the photo at the top of this post—and we just received approval from the town’s Inland Wetlands Commission to replace it. What I’m wondering is whether there’s a way to “tune” the new pump-house roof so that, when slicers hit it with their drives, it will sound exactly the same as the old pump-house roof. We can’t simply re-use the old roof—an early suggestion—because by this point large parts of it are made mostly of rust.